Model: FC20-2BD
Overall size (L×W×H): 8350×1290×2450 mm
Section (W×H): 2.5×2.5~5.5×4.5 m
Drilling speed: 0.8~2 m/min
Drill pipe length: 3050 mm
FC20-2BD hydraulic Drilling jumbo is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering, etc. This series use all hydraulic drive, two booms work together, with high efficiency and speed which can be 0.8-2 m/min. The advanced hydraulically controlled drilling system, which is safe and easy to operate, incorporates the auto stop and anti-jamming function, auto-stop at end-point, auto-wash. This jumbo has a small body, runs with the crawler, can climbing flexibly on 14°slope. Working with electric motor can improve the working environment a lot, reduces noise, dust and energy consumption. The flexible hydraulic rock drill can work on the section, roof, side and floor. The jumbo can not only drill blast hole,according to the the basis of section, it also can drill bolt hole conveniently with our patent impeller.The jumbo runs with both wheels and crawler, even suit working in bad environment.
Item |
Parameter |
|
Body |
Overall size (L×W×H) |
8350×1290×2450 mm |
Hole diameter |
Φ33~Φ102 mm |
|
Drill pipe length |
3050 mm |
|
Hole depth |
2.7 m |
|
Drilling speed |
0.8~2 m/min |
|
Section (W×H) |
2.5×2.5~5.5×4.5 m |
|
Climbing capability ( smooth-riding surface) |
25% |
|
Total weight |
≈8500 kg |
|
Walking aids |
Engine power |
30 KW |
Running speed |
2.5 km/h |
|
Min. turning radius |
4.5 m |
|
Boom |
Up and down |
up55°, down16° |
Swing boom |
inner14°, outer47° |
|
Compensation |
1500 mm |
|
Rotation |
positive180°, negative180° |
|
Thruster |
Pitching |
down105°, up15° |
Swing angle |
inner45°, outer45° |
|
Total length |
4150 mm |
|
Hole depth |
2700 mm |
|
Max. Propulsion |
9000 N |
|
Impacting oil pressure |
30~45 L/min |
|
Impacting flow |
14~16 Mpa |
|
Torque |
60~260 N·m |
|
Impacting energy |
100~200 J |
|
Impacting frequency |
34~67 Hz |
|
Hydraulic system |
Impacting loop pressure |
16Mpa |
Drill pipe rotation loop pressure |
15Mpa |
|
Compensation loop pressure |
10Mpa |
|
Boom loop pressure |
20Mpa |
|
Propulsion loop pressure |
11Mpa |
|
Leg extension loop pressure |
21Mpa |
|
Running loop pressure |
20Mpa |
|
Air system |
Drop tank air pressure |
0.03 Mpa |
Blowing hole air pressure |
0.7 Mpa |
|
Rock drill air pressure |
0.4 Mpa |
|
Water system |
Rock drill water pressure |
(≥) 1.2Mpa |
Colder water pressure |
(≤) 0.6Mpa |
|
Electric system |
Installed power |
30 KW |
Supply voltage |
380 V |
|
Electric motor rotation speed |
1470 r/min |
Your Country : | Your City : | ||
Your Name : | * | Your Phone: | * |
Your E-mail : | * | ||
Interested Products: | |||
Verification Code: | |
Change one! | |
Message: ( You can leave us a message to tell us more of your requirements,we will give you a detailed reply within 24 hours.) |
|||
Copyright(C)2015 Jinan Fucheng Hydraulic Equipment CO., Ltd All rights reserved. Technical Support:Hyhh